|
Brand New Drilling Equipment
We
have the following great opportunity to offer:
All Equipment is Brand New and Unused
Complete List of Equipment below and attached photos.
Location: Texas, USA
NB:
Please Note: This lot of Honghua Drilling Rigs has not been used
and is no longer required for the company's operations and are
being sold to recover funds.
Manufacturer: Honghua
DESCRIPTION
Model of drilling rig: HH- ZJ40DBS Helicopter transportable rig
with 3000 Kg loads, drilling depth capacity 12000 ft (4.000 m)
MAST
Model: JJ320/45-KH
Effective height of mast: 146 ft (44,5 m)
Static hook load capacity: 716.800 lbs. (3.200 kN)
CROWN BLOCK
Model TC320, manufactured by Honghua
Max. Load: 716.800 Lbs. (3.200kN)
No. of pulleys: 6 with perforating cable of 1.1/4” (5x50” and
1x60”)
MONKEY BOARD
Able to work with DP 5” Range II, with Fall Protection Safety
Harness System, Escape
Line (Geronimo) and Ingersoll Rand Man Rider winch.
SUBSTRUCTURE
Max. Capacity of Rotary Table beam: (320 ton)
Setback load (Range II, 5” drill pipe): (3200 kN)
Height of drill floor: 7,5 m (25 ft)
Prepared to receive Walker System removable by
Pins, moveable in two axis “X” and “Y”.
ROTARY TABLE
Pin Drive type, manufactured by Honghua, with opening diameter
of 27-1/2" (698.5 mm),
maximum rotary speed of 220 RPM and maximum static load of
1.000.000 lbs. (4500 kN).
DRAW-WORKS
Disc Brake type actuated by 2 electric motors with minimum 870
HP each and Bit Feeder system (with proximity switch for the
crown Block and Rotary Table).
Emergency Shutdown installed in the Doghouse. 640 m (2,100 ft)
Drill Line 32 mm (1-1/4”) 6×19S IWRC EIPS/RRL.
Cat Head Model YM-16, manufactured by Honghua.
TRAVELLING BLOCK
Model YC315, manufactured by Honghua, with 6 Sheaves and maximum
static load capacity of (3500kN) (790,000 lb.).
HOOK
Model DG315, manufactured by Honghua, built to specification API
Spec 8C, with maximum static load capacity of 790,000 lb. (3.500
kN)
RIG FLOOR TOOLS
Inside BOP’s 3 ½IF – 4 ½IF, DP Elevator 3 ½” – 5”, pneumatic
pipe spinner casing, manual slips. DP. 3 ½” – 5”, automatic DP.
Slips, Casing: Spiders, side door, elevators, aux. elevators,
slips, HFD. C56. Tong DP. Mud saver.
GENSETS
8 sets of Caterpillar Generator Model C-15 ATAAC, 455kW/ 60Hz /
480V, with soundproof enclosures.
AUXILIAR GENERATORS
2 sets of Cooltech Generator Model KJ200E, rated 200 KVA (160
KW).
SWÍVEL
Model SL450, manufactured by Hong Hua, with maximum static load
of 1,000,000 lbs. (4500 kN), maximum dynamic load (API Bearing
Load) of 630,000 lbs. (2800 kN) and maximum rotary speed of 300
RPM.
KELLY SPINNER
Model A6C-2 made by International, with maximum torque of 1,800
ft. Pounds and maximum speed 150 RPM.
IRON ROUGHNECK
Model ST80C, manufactured by National Oilwell Varco (NOV) with
Tubular OD Range of 41/4" to 8-1/2" (108-216mm) and Drill Pipe
range of 3-1/2" to 5-1/2" (89-140mm).
TONGS
− Drill Pipe Tongs Type C, Model 060-273/48, with jaws from
2-7/8" to 5".
− Drill Pipe Tongs type DB, Model Q89-423/90, with jaws from 5"
to 9-1/2".
−Casing Tongs type B, Model Q86-324/75 (from 3-3/8" to 12-3/4")
and Model Q340-915/35 (from 13-3/8" to 20')
−Hydraulic Drill Pipe Power Tong made by ECKEL model 8-5/8
Hydra-Shift HT (with Hydraulic Backup)
BLOWOUT PREVENTERS
Three set of 13-5/8" 5,000 psi Type U, Single Ram BOP, Cameron
style, with Pipe Rams 2-3/8", 2-7/8", 3-1/2", 5", 7", and
9-5/8". One set of 13-5/8" 5,000 psi Annular BOP, Shaffer style,
with lower clamp connection, manufactured by Rongsheng.
BOP ACCUMULATOR
Model FKQ960-8, with 3000Psi (21Mpa) Working Pressure, 17
bottles with a total of 969 l capacity and Remote Panel on Rig
Floor.
CHOKE MANIFOLD
Choke manifold 3-1/8” x 5,000 psi with two manual adjustable
chokes Cameron 3-1/8” x 5,000 psi and hydraulic choke Cameron
3-1/8” x 5,000 psi, manufactured by King Dream.
MUD PUMPS
Qty: 3 sets Heli-transportation Type: Triplex single-acting
piston type. Max. diameter of liner x stroke: 6.1/2” x 9”
Max. strokes: 150 spm Rated Power: 596 KW (800 HP) Max.working
pressure: 34,5MPa (5000 PSI)
SHALE SHAKER
Qty: 3 sets,
Model: Miswaco Meerkat PT Dual Motion Balanced Elliptical Motion
Basic Fluid Capacity:
500 gpm (1.893 L/min) G-force linear motion up to 6,9 G’s
G-force elliptical motion reduces (5,7G’s maximum)
MUD CLEANER
Model: Miswaco 212/6T4 Meerkat Pt. Desander hydrocyclones: 2 x
10”. Desilter hydrocyclones: 16 x 4”
DEGASSER
M-I SWACO Compact D-Gasser, capable of removing entrained gas (including
H2S and corrosive oxygen) from drilling fluid, equipped with
Mission Magnum Degasser Feed Pump Model 8x6x14. Vertical
Degasser with Working Pressure of 102 psi (0.7MPa) and diameter
of fluid inlet pipe 102 mm
DECANTER CENTRIFUGE
M-I SWACO Decanting Centrifuge Model 518, stainless steel
rotating assembly, equipped with M-I SWACO Type II Progressive
Cavity Centrifuge Feed Pump with rated capacity of 22
gallons/100 revolutions@0 psi (82 liters/100 revolutions)
MUD TANKS
13 sets, each made of steel with cover. Total volume 190 m3
(1,200 bbl.), equipped with single compartment Sand Trap tank,
50 bbls Slug Pit and 50 bbls Trip Tank.
CARGO HANDLING SYSTEM
Two MAEDA model LC1385-8B 6,000 kg capacity rating Telescoping
Crawler Crane with Blade Attachment and Quick Disconnect and Two
Tadano Mantis 3612, 16,000 kg capacity Telescopic Crawler Crane.
DRILLING INSTRUMENTATION
− SIEMENS Mud Pits volume sensors
−M/D TOTCO Drilling instr.: WOB Indicator, Connection
Torque Indicator, Tongs Torque Gauge, Mud Pump indicators, Bit
Tracking System, TonMile register, etc.
−Honghua Digital Drilling Recorder
−NOV Deviation Survey Double Recorder
−HONEYWELL Gas detection system
MISCELLANEOUS
−Diesel fuel reserve of 30 m3 (190 bbl.). −Water treatment
System for filtering, purification, chlorination and pH control
for daily water consumption for the camps.
2 Drilling Rigs
Condition: The equipment was purchased 5 years ago but has never
been used.
• It was manufactured in China -> shipped to Brazil -> and
eventually shipped to Houston.
• It has never been turned on, used or tested.
• These two rigs were part of a set of four.
Rigs 3 and 4 have already been sold. They were tested and worked
perfectly.
Rigs 1 and 2 WILL be tested before release.
• Each unit comes with 8 CAT generators. |
